1. features - direct operation from ac source (ac220 240v is available. - new led driving method is adopted. - product lineup consists of luminous flux 800lm, color temperatures of 3000k, 4000k. - high dielectric strength voltage is equipped. - small and thin size. - compliant with rohs directives. - compliant with ce standard (europe). 2. application - downlights - spotlights and so on. 3. outline drawing - unit mm - tolerance : 0.8 - tc point: case temperature measuring point - wire color: brown(live), blue(neutral) LMC01B 1/7 data sheet citizen electronics co., ltd. citizen electronics co.,ltd LMC01B-23l183a-20 built-in module ac220-240v/50-60hz tc=60degc ref.ce-p169111/11 www.datasheet.co.kr datasheet pdf - http://www..net/
4. parts code series lmc01 800lm module our internal control no. circuit type b: power supply built-in type directive characteristic source voltage a : cover plate 23 : ac 220 ac 240 v lighting color general color rendering index l1 : energy star correlated color temperature 3000 k ra= 83 w1 : energy star correlated color temperature 4000 (k) 5. performance (1)absolute maximum rating 40 60%rh, ac 50hz,60hz), for one minutes. (2)recommended operating range tst viso(rms) 4 220 240 - 30 + 65 *1 between the end of the wire of power source input and the module surface, ta=25 , unit v kv 75 data sheet LMC01B storage temperature range 2/7 rating value hzinput frequency frq case temperature citizen electronics co., ltd. 60 parameter - 20 + 40 vin taambient temperature tc input voltage parameter 50 60 264vin symbol rating value tcmax input voltage dielectric strength voltage *1 v symbol unit case temperature operating temperature range top - 20 + 40 LMC01B - 23l183a - 20 ref.ce-p169111/11 www.datasheet.co.kr datasheet pdf - http://www..net/
(3)electro-optical characteristics model : LMC01B-23l183a-20 (tc= 60 ) model : LMC01B-23w183a-20 (tc= 60 ) *2 general color rendering index ? material of rear of the product is aluminium. for the sake of safety, earth connection must be avoided. note: the tolerance of measurement at our tester is vf+/-3%, v+/-10%, chromaticity(x,y)+/-0.005 and ra+/-1. - 100 - 100 25- 26 flicker frequency [hz] - 100 led off duration toff[%] - 28 - 90 97 90 97 power factor pf[%] 90 97 - 73 - 76 current consumption i[ma] - 70 - 120 - 120 directive characteristic fwhm[deg.] - 120 80 83 80 83 cri *2 ra 80 83 54 color temperature cct[k] - 4000 - 4000 - 4000 915 670 970 efficacy lpw[lm/w] - 57 - 57 - - 16 - 18 input power p[w] - 15 240/50 typ min typ - 25 - 100 90 97 3000 83 - 230/50 53 input voltage/frequency 220/50 53 - 15- luminous flux v[lm] 550 input power vin[v]/f[hz] fwhm[deg.] p[w] i[ma] ra lpw[lm/w] 97 [hz] 100100 28 - 90 - 18 620 900 16 230/50 83 - 120120 73 97 240/50- 630 26 for 240v for 220v for 230v parameter symbol luminous flux v[lm] 590 860 current consumption toff[%]led off duration flicker frequency power factor pf[%] - 90 - - min typ min input voltage/frequency vin[v]/f[hz] - 220/50 - citizen electronics co., ltd. 800 - - 3/7 typtyp - 585 - - 850 - for 240v LMC01B for 230v for 220v parameter data sheet typsymbol min minmin 50 efficacy 3000 70 120 cct[k] 80 3000 - 76- -color temperature cri *2 directive characteristic - - 80 - 83 - 80 full-wave rectifier fuse1 fuse2 thermal fuse varistor current control circuit 1 current control circuit 2 led module block diagram live(brown line) neutral(blue line) ac input ref.ce-p169111/11 www.datasheet.co.kr datasheet pdf - http://www..net/
chromaticity coordinate x y a 0.456 0.426 b 0.430 0.417 c 0.415 0.381 d 0.437 0.389 0.456 0.426 x y a 0.401 0.404 b 0.374 0.387 c 0.367 0.358 d 0.390 0.372 0.401 0.404 note: the tolerance of measurement at our tester is vf+/-3%, v+/-10%, chromaticity(x,y)+/-0.005 and ra+/-1. data sheet LMC01B citizen electronics co., ltd. color rank l1 color rank w1 4/7 x-y chart [cie1931] 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 4 7 x y l1 (3000 k) w1 (4000 k) ref.ce-p169111/11 www.datasheet.co.kr datasheet pdf - http://www..net/
6. precautions for use (1) usage environment and storage ? do not use or store the product under the environment where gas of chlorine, sulfur, acidity, chlorine, or salt are compressed or condensed, or any substance which causes corrosion exists. avoid using the product in the sealed space. ? in the case the product is used by bonding, or connected to other parts as one unit, ensure that there is no quality influence on the product through an appropriate verification. ? store the product in the ambient temperature of 5-40 degree c, humidity of 20-70%, recommended storage period is three(3) months. if you use the product after 3 months are passed, please check electrical connectivity before use. ? use in dry place in doors. (the product is not waterproof.) ? do not use as a light fitting or an indicating light for an emergency exit. ? do not connect the product to the fitting which connects to diming equipment. (2) handling ? for the sake of safety, do not look at led lighting source directly. ? flicker is created due to direct operation from ac source. sufficient verification is required when the product is equipped with a device. ? since this product is designed so as to be used as being assembled in a general lighting fixture, please do not use this product only. when assembling to a lighting fixture, ensure sufficient evaluation as a lighting fixture. ? reflow soldering is not applicable. ultrasonic cleaning is not applicable. ? do not use cleaning agent nor chemical agent as they can cause discoloration or quality deterioration. ? excessive shock such as a drop, vibration, or heat which exceeds absolute maximum rating must not be applied to the product because not only deterioration of performance of the product but also degradation of the value of equipped dielectric strength voltage can occur by handling. ? avoid contacting the product with a sharp metalic nail and so on to the resin portion. do not bend nor twist by adding exterior stress. such handling brings about stress to the soldering part or to the insulation layer of pcb and causes the product no-lighting up, shortning lifetime and destruction as a worst case. ? as leds of this product are driven by applying ac source directly, led part is in high voltage. do not detach the transparent cover which is equipped covering led top face of the module, nor use the product without the cover, as such usage is very risky. ? although this product is equipped with fuses and a temperature fuse, ensure safety measures sufficiently on your product. ? when using this product, make sure to check that there is no contamination nor foreign substrances on the transparent cover over the light emission part. (for example, black dots, colored tapes or markings etc.) or, in the worst-case scenario, such contamination or foreign substances on the transparent cover cause melting of the cover. ? when handling electric wire for connecting power source, pay full attention not to scratch the coat of wire nor apply pressure by nipping forcibly. (3) handling of static electricity ? as these products are sensitive to statistics electricity charge, pay attention when handling and take measures to prevent any static electricity being produced by wearing of a wristband or anti-static gloves and so on. ? all equipment and devices relating to this product must be properly grounded. ? after assemblying in device, make sure that there is no damage (leak). ? detect any damage due to static by a light-on test. ? altough dielectric strength voltage of 4kv is equipped in this product, for the sake of safety, adding insulating function is strongly recommended in your product, for example by insulating your product doubly or triply. (4) driving circuit ? this product must be used within the range of rated voltage. data sheet LMC01B 5/7 citizen electronics co., ltd. ref.ce-p169111/11 www.datasheet.co.kr datasheet pdf - http://www..net/
(5) fixing to a heatsink ? this product should be secured firmly by fastening three m3 screws as shown in the under drawing. when screwing, pay attention not to add stress to the product. ? material of rear of the product is aluminium. when fixing, place thermal conductive material (sheet or grease et cetera) which is heat conductive between the rear of the product and the heatsink and check carefully whether the product and the heatsink are fully bonded before use. ? as three salients by screws are on the rear of the product (heatsink fixing face) at 120 degrees pitch, create bypass holes for them on the heatsink side. ? do not add any additional process such as mounting holes. do not replace the wiring or disassemble. m3 screw x 3 points (120 degree pitch) bypass hole x 3 points (120 degrees pitch) thermal conductive material(grease etc.) exterior heatsink (6) heat generation ? this product is designed in consideration of heat release by a luminair, therefore a heatsink must be fixed to the product. if this product is used without fixing to a heatsink, smoking and/or ignition can occur. ? appropriate heat release design is required to use this product efficiently. as for heat generation, pay attention to use within the range of rating of the case temperature. ? factors responsible for an increase in temperature include heat geration attributed to ambient temperature conditions or power dissipation. thus, drive conditions should be taken into consideration, depending on ambient temperature (ta). (7) others ? this product complies with rohs directives. citizen electronics co., ltd. data sheet LMC01B 6/7 ref.ce-p169111/11 www.datasheet.co.kr datasheet pdf - http://www..net/
7. precautions with regard to product use 1.this document is provided for reference purposes only so that citizen electronics' products are used as intended. citizen electronics neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any any other rights of citizen electronics or any third party with respect to the information in this document. 2.all information included in this document such as product data, diagrams, charts, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any citizen electronics' products listed in this document, please confirm the latest product information with a citizen electronics' sales office, and formal specifications must be exchanged and signed by both parties prior to mass production. 3.citizen electronics has used reasonable care in compiling the information included in this document, but citizen electronics assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 4.absent written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, citizen electronics assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or no infringement. 5.though citizen electronics works continually to improve products' quality and reliability, products can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safeguards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. in addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only with evaluating by their own but also by the entire system. citizen electronics assumes no liability for customers' product design or applications. 6.please contact citizen electronics' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries. LMC01B 7/7 citizen electronics co., ltd. data sheet ref.ce-p169111/11 www.datasheet.co.kr datasheet pdf - http://www..net/
|
